Roofing in Burlingame | Repair, Replacement & Tile Specialists

Quick Answer: We provide roof inspection, repair, replacement, tile, flat and commercial roofing across Burlingame (ZIP codes 94010 and 94011). Burlingame’s roofs fail in three predictable ways — tree-canopy debris and shade moss, worn-out underlayment under pre-war tile, and hillside drainage — and every estimate we write starts by identifying which one is actually on your roof. Roofing permits here are issued by the City of Burlingame Building Division. Call +18338046249 for a detailed inspection.
Burlingame is really two roofing markets sharing one city limit. Down in the flats — Easton Addition, the Broadway corridor, the streets around Burlingame Avenue — you’re looking at 1920s–40s Mediterranean Revival and Craftsman homes, many still carrying tile, slate or second-generation composition roofs under some of the heaviest tree canopy on the Peninsula. Up in Burlingame Hills and Mills Estates it’s 1950s–70s homes on sloped lots, where drainage, debris-filled valleys and sun exposure do the damage instead.
A roofer who quotes both areas the same way hasn’t spent much time on either’s roofs. We have, and this page is written the way we’d explain it standing in your driveway.
Why Burlingame Roofs Wear Out the Way They Do
The City of Trees Drops Its Canopy on Your Roof
Burlingame’s nickname is earned, and your gutters know it. Mature oaks, eucalyptus rows along El Camino Real, and dense street canopy shed year-round — leaves, bark strips, acorns and fine debris that pack into roof valleys, sit behind chimneys, and dam up gutters until water backs up under the roof covering.
Debris holds moisture against the surface long after rain stops, which is why Burlingame roofs grow moss and algae in shaded sections even though the city gets far less fog than San Francisco. The fix is unglamorous: valleys and gutters cleared at least once a year before the rainy season, and a roof covering chosen with shade exposure in mind. Our guide to stopping moss on Bay Area roofs covers the treatment side in detail.
Tile Outlives Its Underlayment — That’s the Burlingame Leak
Most tile roofs in the older neighborhoods don’t leak because the tile failed. Clay and concrete tile routinely last 50 years or more. What fails is the felt underlayment beneath it, which breaks down in roughly 20–30 years. The tiles look perfect from the street while water quietly reaches the deck through cracked, brittle felt — usually first at valleys, flashing and the eaves.
If your pre-war or mid-century tile roof is leaking and a roofer quotes a full tile replacement without checking the underlayment, get a second opinion: a lift-and-relay (tiles lifted, new underlayment installed, sound tiles re-laid) typically costs 40–60% less than full tile replacement and preserves the roof your house was designed with. Details are on our tile roofing page.
Hillside Water Always Finds the Low Point
Burlingame Hills and the sloped streets of Mills Estates shed serious water in an atmospheric river. On hillside lots, the roof’s job includes moving upslope runoff past the house: drainage planes, cricket flashing behind wide chimneys, gutters sized for peak flow, and downspouts that discharge away from the foundation. Steep and complex roofs here also mean more flashing intersections — and flashing, not field material, is where hillside leaks start. Parts of the hills fall under the City’s Hillside Overlay Zone, which can add requirements to a project; we flag that at inspection, before it becomes a permit surprise.
Roofing Services in Burlingame
Roof Inspections in Burlingame
A roof inspection from us is a working document, not a sales pitch: condition of the covering, underlayment indicators, flashing, valleys, drainage, ventilation, and a photo report with a written summary you can hand to an insurer, a buyer or your own files. Homeowners call us most often for pre-purchase inspections, insurer documentation, and second opinions — including when another company has announced a roof has “6–12 months left” without showing evidence.
Roof Repair and Leak Detection
Most Burlingame roof repairs run 450–1,800 depending on access and materials. The usual suspects here: cracked or slipped tile, failed valley metal, debris-dam leaks, worn pipe-boot and vent flashing, and chimney flashing on the older masonry chimneys. For active leaks, our leak detection process finds the entry point before anyone talks about replacing anything — water stains on a ceiling rarely sit directly below the hole.
Roof Replacement in Burlingame
When a roof is genuinely done, replacement means a full tear-off to the deck — never a mystery overlay. On pre-war Burlingame homes the deck is often original board sheathing rather than plywood; we inspect it during tear-off, replace rotted boards, and tell you the cost before the work expands, not after.
Architectural shingles are the workhorse for most Burlingame homes — see our asphalt shingle guide for profiles and Title 24 cool-roof options that suit the city’s sunny south-facing slopes.
Tile roofing — clay and concrete, new installs and lift-and-relay — for the Mediterranean and Spanish-style homes where the roof is the architecture.
Metal roofing, including standing seam, suits the newer custom builds in the hills and mid-century homes in Mills Estates — our metal roofing page covers profiles and finishes.
Flat and low-slope sections — additions, garages, and Burlingame’s small commercial buildings — get TPO, modified bitumen (torch-down) or a silicone coating restoration when the underlying roof qualifies; the full comparison lives on our flat roofing page.
Commercial and Multi-Family Roofing
Burlingame’s commercial roofing work concentrates along the Bayfront and El Camino corridors — offices, hotels, retail and multi-family buildings on flat systems. We handle TPO and modified bitumen replacement, coating restoration, and maintenance programs, scheduled so tenants and customers aren’t working under a tear-off.
Skylights, Ventilation and Solar Coordination
We install and flash skylights as part of re-roofing projects, correct attic ventilation (a quiet cause of premature shingle failure on shaded Burlingame lots), and coordinate solar panel removal and reinstallation with your solar provider when a re-roof goes under an existing array — the removal and reset gets written into the project scope up front, not discovered mid-job.
How Much Does a New Roof Cost in Burlingame?
These are the same published ranges we work from across the Peninsula — Burlingame’s larger homes and tile stock push many projects toward the upper half, but nobody honest can price your roof from a webpage. What we can do is show the real math:
| Service | Typical Cost |
|---|---|
| Roof replacement — architectural shingle | $6.50–$10.00 per sq ft |
| Roof replacement — concrete tile | $12.00–$20.00 per sq ft |
| Roof replacement — clay tile | $15.00–$25.00 per sq ft |
| Tile lift-and-relay (new underlayment) | 40–60% less than full tile replacement |
| Roof replacement — standing seam metal | $12.00–$20.00 per sq ft |
| Flat roof — TPO membrane | $7.00–$11.00 per sq ft |
| Flat roof — torch-down / modified bitumen | $8.00–$13.00 per sq ft |
| Silicone roof coating restoration | $3.50–$6.00 per sq ft |
| Typical full replacement, whole project | $17,000–$42,000 |
| Most roof repairs | $450–$1,800 |
| Flat roof repairs | $350–$2,500 |
Three honest notes. First, a wide quote spread on the same house — and Burlingame homeowners tell us they’ve seen spreads of $10,000 or more between bids — usually comes down to scope, not greed: one bid includes tear-off and disposal, deck repair and new underlayment, another quietly doesn’t. Compare line items, not totals. Second, the one cost nobody can quote before tear-off is deck repair; a good contract prices it per board or per sheet in writing, in advance. Third, California law caps a home-improvement deposit at $1,000 or 10% of the contract price, whichever is less — any roofer asking for more before work starts is telling you something about how they run their business. The full material-by-material comparison is on our roofing materials page.
Burlingame Neighborhoods We Serve
| Neighborhood | Homes You’ll See | What It Means for the Roof |
|---|---|---|
| Burlingame Hills | 1950s–70s larger homes on sloped, wooded lots | Hillside drainage, debris-filled valleys, complex flashing |
| Easton Addition | Vintage Craftsman, Victorian and Colonial near Broadway | Aging composition and tile, heavy tree canopy, shade moss |
| Ray Park | Mid-century family homes, tree-lined streets | Second-generation shingle roofs reaching end of life |
| Mills Estates | 1960s ranch and mid-century homes, some with atriums | Low-slope sections, original underlayment age, solar-ready re-roofs |
| Burlingame Park | Early-1900s homes near the downtown core | Pre-war tile and board sheathing, chimney flashing |
| Burlingame Village | 1920s–30s cottages and bungalows | Smaller, steeper roofs; valley and eave detail work |
| Burlingame Terrace | Historic homes between Broadway and Burlingame Ave | Character tile and shingle, mature-tree debris |
| Burlingame Gardens | Post-war single-family streets | Composition roofs on second or third cycle |
| Lyon-Hoag | Quiet residential streets near the bay side | Flat sections over additions, coating candidates |
| Oak Grove Manor | Established homes near Oak Grove Ave | Mixed shingle and tile, gutter and valley maintenance |
| Burlingame Gate | Homes near the San Mateo border | Wind-driven rain exposure on west-facing slopes |
| Downtown / Bayfront | Mixed-use, multi-family and small commercial | Flat TPO and mod-bit systems, maintenance programs |
We serve all of Burlingame — ZIP codes 94010 and 94011 — along with neighboring San Mateo and South San Francisco.
Roofing Permits in Burlingame: The City Handles Them — Not the County
One piece of misinformation circulates on roofer websites, so let’s set it straight: a roof replacement in Burlingame needs a building permit from the City of Burlingame Building Division — 501 Primrose Road, 2nd Floor, Burlingame, CA 94010 — not from San Mateo County. Applications go through the City’s eTRAKiT online portal, inspections are scheduled with the Building Division (650-558-7260), and hillside properties may fall under the Hillside Overlay Zone’s additional requirements. City rules also set construction hours — 8:00 AM to 7:00 PM on weekdays and 9:00 AM to 6:00 PM on Saturdays, with no Sunday or holiday construction — and we schedule Burlingame jobs inside those windows. Minor repairs generally don’t need a permit; a tear-off and replacement does. Any contractor who advises you to skip the permit on a replacement is asking you to carry the risk — an unpermitted re-roof surfaces at resale, in insurance claims, and in city records. We pull the permit, schedule the inspections, and close it out as part of the job.
How a Burlingame Roofing Project Runs
Step 1 — Detailed inspection. We get on the roof, photograph everything, and check the covering, underlayment indicators, flashing and deck where accessible.
Step 2 — Written report and scope. You get the photos, the findings, and a written scope that separates must-fix from can-wait. If a repair buys you honest years, we say so.
Step 3 — Permit. We file with the City of Burlingame Building Division through eTRAKiT and schedule inspections.
Step 4 — The work. Tear-off to the deck, deck repairs priced as agreed in writing, new underlayment and covering installed to manufacturer spec and Title 24 where it applies.
Step 5 — Final inspection and cleanup. City sign-off, magnetic nail sweep, and your documentation packet: permit record, photos, and warranty paperwork.
Why Burlingame Homeowners Call Us
Because we’d rather lose a replacement sale than sell one you don’t need. We’re a licensed and insured California C-39 roofing contractor working under a written workmanship warranty, with manufacturer material warranties of 20–50 years on qualifying systems. Our reviews come from the same approach we take on this page: show the numbers, name the actual problem, quote the fix — and let the homeowner decide without a countdown timer.
If your Burlingame roof is leaking, aging, or just overdue for an honest look, call +18338046249. You’ll get a detailed inspection, a photo report, and a straight answer about what your roof actually needs.
