Roofing Tar and Coating in San Francisco

Roofing Tar and Coating in San Francisco: Tar vs Coating, Costs & What to Use (2026)

Roofer applying roofing cement 3fd90f0c 11zon 1

Quick Answer: What Is Roofing Tar, and Should You Use It in San Francisco?

Roofing tar is a thick, sticky sealant for patching roof leaks. Most of what you buy as roofing tar in 2026 is asphalt roof cement — a trowel-grade mastic made to ASTM D4586. It is a fast, cheap, temporary patch on asphalt roofs, and the wrong fix for EPDM rubber, TPO and PVC roofs, slate, wood shingles, and any silicone-coated roof. In San Francisco, most residential flat roofs are torch-down, and the makers say tar may not give satisfactory results over some APP membranes. A coating beats tar for the long term — silicone runs 3.50–6 per sq ft here and lasts 10–20 years, against 2–5 years for a tar patch. See our best roof coating guide.

What Roofing Tar Is: The 4 Types

Three different things share the name: cold-applied asphalt roof cement (ASTM D4586); hot tar, melted bitumen mopped between felt plies; and a wet patch, asphalt cement rated for damp surfaces under ASTM D3409.

TypeWhere It GoesPriceNote
Coal tar pitchCommercial built-up roofs7.91–9.82 / sq ft installedSelf-heals, 20–30 years, pro-only
Asphalt-based tarResidential patchesAbout $40 for a 2×2 ft patchMost common, easy to apply cold, cracks with age
Rubberized tarRepairs, small cracks$22.99 / gal (Henry 208R)SBS rubber, flexible, bonds wet where rated
Modified bitumenNew roofs, extra layers7–13 / sq ft installedPolymer asphalt in rolls, a system not a patch

Roof Tar vs Roof Coating: The Honest Comparison

One competitor promises this comparison and leaves every table blank. Here it is, with real numbers.

OptionLastsCostStanding WaterBest For
Tar cement patch2–5 yearsAbout $40 DIY patchPoor, fails where water standsEmergency patch on asphalt roofs
Silicone coating10–20 years3.50–6 / sq ft (SF)Best, tolerates pondingSound flat roof, full restore
Elastomeric / acrylic coating5–15 years2–5 / sq ft (Madison)Poor to fair, acrylic hates pondingDry, well-drained flat roof
Hot tar / BUR system20–30 years7.91–9.82 / sq ftGood, coal tar tolerates pondingFull built-up roof, pro job

The rule that decides between them is moisture, not price: a coating over wet insulation traps the water and fails early, and most coating warranties exclude standing water. The Madison guide’s gate: a coating is legitimate only when a moisture scan shows dry insulation and sound seams, with a written manufacturer warranty on that assembly. Otherwise it is lipstick. A detailed inspection with a moisture check settles it first.

Which Roofing Tar to Buy: Products Compared

Prices are Google Shopping listings checked October 19, 2026, unless noted.

ProductBest ForWet Surface?CoveragePrice, Oct 2026
Henry 208R Wet PatchEmergency patch in rainYes, ASTM D340912.5 sq ft / gal at 1/8 in$22.99 / gal
Black Jack 2172Dry-surface patchYes, per label25 LF of 1/4 in bead / tubeNot priced in source
Sashco Through the Roof!Flashing, metal, fine cracksYes, damp surfacesTube$13.48 / 10.5 oz
Black Jack Rubber Coat #57Fibered coating, worn roofsNo, dry surfaces onlyAbout 250 sq ft / pailAbout $42 / 5 gal
Karnak 71 AFAlligatored roofs, recoatDry surface4 gal / 100 sq ftNot published

Henry 208R is the only product in the received set with a published wet-adhesion rating: 100% wet-surface adhesion under ASTM D3409, adhering from 5 to 120 degrees. Black Jack 2172 wants a 50 to 120 degree surface. The fibered coatings are a different job: Black Jack Rubber Coat #57, about $42 for a 5-gallon pail covering about 250 sq ft (creator claim); Karnak 71 AF, 4 gallons per 100 sq ft, lasting 3 to 5 years before a recoat.

What Tar Works On — and What It Ruins

Two received competitors say tar works on flat roofs generally, and that is wrong — GAF’s TAB R-157 warns asphalt oils can migrate into EPDM.

Your RoofTar?Why
Asphalt shinglesYes, spot patchSame asphalt chemistry
Built-up, tar and gravelYes, after clearing gravelRemove gravel first, then patch
SBS modified bitumenYesListed on the Henry sheet
APP torch-downAsk the makerMay not bond to some APP membranes
Metal flashing, seamsYes, on clean metalWire-brush rust and scale first
EPDM rubberNoOils migrate; both makers exclude it
TPO, PVC single-plyNoNeeds a welded or maker-approved patch
Wood shingles, shakesNoNot recommended on the Henry sheet
SlateNoNeeds a roofer who handles slate
Silicone-coated roofNoTar will not stick to silicone
Tile, nails in underlaymentTar on nail heads onlyFlashing is the fix, not tar

Three rows come from the user posts: tar on slate — find a roofer who handles slate (284 votes, 95 comments); tar on TPO — do not put tar on TPO. The APP torch-down row is the San Francisco row: most residential flat roofs here are torch-down, and Henry’s sheet says its cement may not give satisfactory results over some APP membranes. Identify the membrane first — roof leak detection finds the entry point.

How to Patch a Roof Leak With Tar, Step by Step

Per the Henry 208R and Black Jack 2172 data sheets. 1. Check the temperature and the label. Black Jack 2172 wants 50 to 120 degrees; Henry 208R adheres from 5 to 120 degrees and on wet surfaces. 2. Find and clean the leak source. Sweep off debris, remove embedded gravel, cut away old cement. Do not repair a tar-and-gravel roof with blisters — patching over a blister fails. 3. Trowel on the first coat. Spread cement 1/8 to 1/4 in thick and at least 2 in past the damage, feathering the edges. For a shingle tear, lift the tab, spread cement underneath, press it back down, re-nail, and cover the tear and each nail head. 4. Embed reinforcing fabric. If the damage is over 1/4 in wide or 2 in long, press Henry 181 or 183 fabric — or polyester or glass fabric — into the wet cement, then trowel a second coat over it until the mesh disappears. Polyester fleece, not cotton. 5. Let it cure, then coat. Wait 30 days before a Henry roof coating over 208R, or 30 to 60 days before a reflective coating over Black Jack 2172. Treat any rain repair as an emergency — flat roof repair in wet weather covers the rain-day rules.

Tar and Gravel (BUR) Roofs in San Francisco

Built-up roofing — layers of hot bitumen and felt topped with gravel — is the oldest low-slope system in the city, common on 1950s and 1960s homes, lasting 20 to 30 years. Clear the gravel back, repair with compatible bitumen and felts, and restore the gravel. Tar smeared over gravel cracks. Do not repair a blistered BUR at all. A user post from one day ago asks about tar-and-gravel roof replacement, TPO vs IB PVC, in the SF Bay Area. Asbestos — felts, mastics and coal-tar pitch from the 1960s and 1970s can contain asbestos, so test before any tear-off is bid. Heat — a tar-and-gravel roof transfers heat; a reflective coating is the usual answer.

Roofing Tar in San Francisco: Fog, Ponding and Torch-Down

San Francisco’s flat roofs live under the marine layer — fog from the Pacific, damp mornings, and a rain season that runs November through March. Tar cement needs a dry surface unless the label claims wet use, and fog stretches cure times. That is why the wet-rated product matters here: Henry 208R is rated for wet-surface adhesion and adheres down to 5 degrees. A dry-surface cement on a fog-damp roof in the Richmond (94118, 94121) or the Sunset (94122, 94116) will not bond. Second, ponding: silicone tolerates it; tar does not. If your roof holds water for more than 48 hours after rain, a tar patch is the wrong spend. Our silicone roof coating guide is the comparison to read next. Third, the roof itself: most residential flat roofs in the Mission (94110), the Castro (94114), Potrero Hill (94107), Bayview (94124), the Excelsior (94112) and North Beach (94133) are torch-down — and the makers say tar may not bond to some APP membranes. That is a detailed inspection question. San Francisco is Climate Zone 3 — see the Title 24 guide — where the prescriptive cool-roof rule does not apply to low-slope nonresidential roofs.

What a Tar Patch Costs in San Francisco

FixWhat You PayWhat It Is
DIY tar patch, 2×2 ftAbout $40 materials1 gal Henry 208R + fabric roll
Pro small repair361–439HomeWyse, Jan 2026, national benchmark
SF flat roof repair350–2,500Site figure, San Francisco
Silicone coating, SF3.50–6 / sq ftSite figure, San Francisco
Coating restoration2–5 / sq ftMadison guide; 4–8 in Torrance
Full flat replacement, SF7–13 / sq ftSite figure, TPO to torch-down

The 361–439 HomeWyse figure is a national benchmark for a small pro repair; the 350–2,500 site figure is San Francisco flat roof repair. The $40 DIY patch is materials only, for a 2 ft by 2 ft area, and it buys 2–5 years — see our guide to reading a roofing quote.

When Tar Will Not Save Your Roof

Tar covers a symptom: a patch hides the problem while water keeps moving inside the assembly. Call a roofer instead when you see multiple leaks, soft or sagging decking, daylight through the deck, an asphalt roof past roughly 20 years, leaks around chimneys, skylights, or valleys, blisters on a built-up roof, ponding water that stays more than 48 hours, or a tar patch that has already failed once in the same spot.

Safety: Fumes, Fire and Asbestos

Roofing tar is not a harmless bucket of glue. Coal-tar pitch volatiles are classified as an occupational carcinogen. Hot tar runs near 500 degrees in the kettle, and torch work reaches 2,000 degrees at the flame. Work in a well-ventilated area, wear a mask, and keep the kettle off the roof. Asbestos is the other safety rule: felts, mastics and coal-tar pitch from the 1960s and 1970s can contain asbestos. Test before any tear-off is bid.

How We Checked This

Sources: the four competitor pages received with the brief, ten more found by live search, about 84 social media post titles, seven People Also Search items, and three video transcripts. Prices are Google Shopping listings checked October 19, 2026. No Semrush data arrived.

Frequently Asked Questions

Is roofing tar good for a roof leak?

Yes, as a fast temporary fix on asphalt roofs — 1/8 to 1/4 in thick, 2 in past the damage, fabric over 1/4 in wide.

How long does roof tar last?

A cement patch: 2 to 5 years. Hot-applied tar on a built-up roof: 20 to 30 years.

Can you put tar on a roof in the rain?

Only with a product labelled for wet use — Henry 208R is rated 100% wet-surface adhesion under ASTM D3409.

What is the difference between roofing tar and roofing cement?

They overlap: roofing cement is a trowel-grade asphalt mastic made to ASTM D4586; roofing tar is a looser term for the same cold cement.

Can you use roofing tar on a rubber roof?

No. Henry 208R is not recommended over rubber or PVC, and Black Jack 2172 excludes EPDM, Hypalon and PVC.

Can you put tar on a torch-down roof in San Francisco?

Ask the membrane maker first: Henry’s sheet says its cement may not give satisfactory results over some APP membranes.

Is coating your roof a good idea?

Yes, when the roof is sound and dry: silicone costs 3.50–6 per sq ft and lasts 10–20 years. No, when the insulation is wet or the roof ponds water.

How much does roofing tar cost in San Francisco?

A DIY patch on a 2×2 ft area is about $40 in materials. A pro small repair runs 361–439; San Francisco flat roof repair runs 350–2,500.

Does roofing tar work on shingles?

Yes, as a spot patch for a torn tab or a popped nail. Lift the tab, spread cement underneath, press it back down, and re-nail.

What is tar and gravel roofing, and is it still used?

Tar and gravel is built-up roofing — layers of hot bitumen and felt topped with gravel — common on 1950s and 1960s homes, lasting 20 to 30 years.

Do roofers still use tar in 2026?

Hot tar is declining — kettles, fumes and fire risk have pushed the trade toward cold cements and coatings.

Bottom line

 Roofing tar is the cheapest, fastest emergency patch you can buy — about $40 in materials for a 2×2 ft area — and the right call for a small emergency repair on an asphalt roof. It is the wrong call on EPDM, TPO, PVC, slate, wood shingles and silicone-coated roofs, and it may not bond to the torch-down membrane on most San Francisco flat roofs. A silicone coating at 3.50–6 per sq ft lasts 10–20 years against 2–5 for a tar patch — but only on a sound, dry roof. NAICS Code 238160 – Roofing Contractors. Call +1 833-804-6249 for a detailed inspection.

Similar Posts